Things to know:
- Kuvings juicers need to be washed by hand because the high heat from dishwashers may warp or damage the parts.
- Wash the parts with soap immediately after juicing to prevent build-up from solidifying.
- Keep the holes in the juicing strainer clear of pulp.
1. Disassemble the juicer
The 6 parts to clean are the hopper, hopper extension, strainer, wiper, auger (screw), and juicing bowl.
2. Rinse the parts under water
Use the included brush, a sponge, or a dish scrubber to make sure everything else is clean and debris-free.
3. Clean the auger
Finding pulp in the auger cavity is normal; use the narrow end of the included brush to get to the excess pulp under the auger. Just the force of water will help to clear it out, too.
4. Unlock the pulp outlet
Push the lower tabs on the pulp spout to unlock it. Opening the pulp spout makes accessing this chute easier to clean.
5. Open the juice spout
The smart cap can be removed for easier access.
6. Let the parts air-dry
Or wipe thoroughly with a soft towel if you want it dried and assembled. Then you’re done!
For additional assistance, please contact us.
Loving your Kuvings juicer? Write a review.
